Trending Content

Flexco Elevate® Belt Rip Prevention

July 7, 2026

Sponsored Content

Digital damage prevention for conveyor belts in the pulp & paper industry

Executive summary

Conveyor belts are critical production components in the pulp & paper industry. As a result, belt damage – particularly longitudinal tears – represents one of the most significant and costly operational risks. Unplanned downtime leads to significant costs, jeopardizes process stability, and compromises safety.

The Flexco Elevate® Belt Rip Prevention System is an innovative AI-powered solution that detects belt damage in real time and automatically initiates corrective actions. The system’s approach: rather than reacting, it proactively prevents damage before it occurs.

Conveyor systems as a risk

Conveyor systems are an essential component of industrial value creation: even a few minutes of downtime can result in immediate financial losses. In many facilities, downtime quickly adds up to several hours or even days, with correspondingly high financial consequences. Common causes include material jams at transfer points, foreign objects in the conveyed material, wear, spillage, carryback, belt misalignment, and mechanical damage. These problems not only lead to losses in efficiency and productivity but also to increased maintenance costs and safety risks. 

Belt rips as a critical failure scenario

Rips and breakthroughs in the conveyor belt are particularly serious. They are often caused by foreign objects or mechanical stress and may lead to complete system failure in a very short time. If not addressed early on, the damage can quickly escalate and extend over long sections of the belt. In practice, a single incident possibly results in several days of downtime and losses amounting to hundreds of thousands of euros.

Causes of belt damage

In general, there are several common causes of belt damage that are also relevant to applications in the pulp and paper industry, among others.

  • Foreign objects and material impact
    Foreign material can enter the system and become stuck, acting like a cutting tool and causing rips or cuts in the belt.
  • Inefficient transfer points
    Transfer points are among the most critical areas because damage and unplanned downtime frequently occur here due to blockages.
  • Inadequate maintenance
    Without regular inspections, problems remain undetected until they escalate into major damage. Therefore, a proactive maintenance approach can result in lower costs.

Traditionally, inspections in most facilities are conducted periodically rather than continuously. Consequently, problems are often identified only when they have already become critical. Downtime resulting from these reactive repairs is often high, increasing downtime costs. Therefore, preventive maintenance is a significantly more cost-effective and lower-risk solution than a reactive strategy.

The Innovation: Elevate® Belt Rip Prevention

The Flexco Elevate® Belt Rip Prevention System is based on an innovative monitoring concept that eliminates the need for sensors in the belt or additional installed equipment.

The system continuously analyses drive and process data, detecting signs of wear, operational anomalies, and changes in material flow.

Continuous data collection and analysis identify wear patterns and calculate trends. This makes maintenance more predictable and efficient, allowing for smarter planning. Accessing operational data remotely via the platform significantly reduces inspection effort and safety risks.

If critical events are detected through data analysis, the system immediately reacts by shutting down within seconds and alerting operating personnel. This rapid response prevents costly total failure.

The concrete economic benefits:

  • Reduction of unplanned downtime
    Early detection and immediate response prevent critical failures.
  • Prevention of total losses
    In a real-world case, belt damage was stopped after just a few meters, preventing a complete replacement.
  • Fast ROI
    A single incident of damage can incur significant costs. The solution typically pays for itself in a very short time.
  • Increased conveyor availability
    Continuous monitoring stabilizes operations and optimizes productivity.
  • Enhanced safety
    The risk of accidents caused by material leakage, spillage, or the replacement of damaged components with hazardous materials is significantly reduced through early system shutdown and the targeted detection of problematic incidents.

In particular, for the pulp and paper industry, continuous monitoring, data-driven maintenance, and rapid response mechanisms, such as reducing foreign object risks, ensure continuous production and enable the industry to meet its high availability requirements. 

 

Conclusion

Conveyor belts are critical components in the pulp and paper industry, but they also pose a significant risk. Traditional maintenance approaches are insufficient to meet the growing demand for uptime, efficiency, and safety.

The Flexco Elevate® Belt Rip Prevention System is a cost-effective solution using real-time monitoring, AI-based anomaly detection, and automatic damage prevention.

This transforms reactive maintenance into a proactive, data-driven strategy that improves production reliability and cost-effectiveness sustainably.

Post Tags