Trending Content

What You Should Expect from a Proper Reel Spool Refurbishment

October 16, 2025

feature
tissue reel spools require maintenance
When tissue reel spools require maintenance beyond the scope of what’s usually carried out in the mill, it’s time to send them in for a complete evaluation and refurbishment. ALL IMAGES COURTESY OF GOLDENROD CORPORATION

Tissue reel spools are the workhorses of any modern tissue paper machine. These machines operate 24/7 at a continuous speed of 5,000 fpm and faster.

When it comes to reel spools, the industry standard is the Goldenrod (Svecom) Model 1260 LDB pneumatic reel spool. This spool features multiple full-length grip ledges, metal centering ledges, and an iso valve package that ensures continuous production without interruption. When properly maintained, the model 1260 LDB is designed to last 20 or more years.

Most routine maintenance on the Model 1260 LDB Reel Spool is simple and is done onsite at the tissue mill. Goldenrod (Svecom) provides a step-by-step preventive maintenance guide that walks the user through proper care and quarterly visual inspection checklist of all surface components. Tasks like simple bladder replacement, cleaning dust and debris from the crevasses of the expanding grip/centering ledges, and proper greasing are also explained.

balancing reel spools
Balancing reel spools to grade G 6.3 is common, but balancing to G 1.6 is the gold standard for tighter tolerance so the spool performs better and lasts longer.

What happens when issues arise that are outside the scope of routine maintenance—body dings, bearing or brake hub issues, or a bent spool that no longer runs true? Solution: Goldenrod has a complete service center located in Beacon Falls, Connecticut, US.

In most cases, it can take the most challenged, worn and tired reel spools and refurbish to “like new” condition. Once it is determined that the best course of action is to send the reel spool back to Goldenrod, the team discusses all issues with the mill for a complete understanding of what is needed before a Return Authorization Number is issued.

Advertisement: 2112206_RuntechSystemsOy_29

How to Save Energy in Tissue Machine Vacuum System?

Switch to RunEco EP Turbo Blowers and save energy by 30-70%

www.runtech.fi

WHAT HAPPENS WHEN THE REEL SPOOL ARRIVES AT GOLDENROD?

A reel spool refurbishment begins with a thorough inspection of all components and operation. Runout is checked, and all surface areas are inspected for damage that can affect proper operation and reliability.

A proper reel spool inspection checklist consists of:

  • Thorough inspection of all components.
  • Inspection of all surface areas for damage that can affect proper operation.
  • Bearing/housing inspection: Check seals, o-rings, general operation and grease condition/quantity.
  • Grip ledge and centering ledge slots inspected for any damage.
  • Inflation/deflation: All expanding components are cycle tested for proper actuation/retraction.
  • Centering ledges: Check condition as compared to original expansion/contraction specs.
  • Grip ledges: Inspected for tears, gouges or inconsistencies that can affect grip.
  • Straighten and balance: Spool placed in Model CEMB Industrial balancer. If the spool has been run out of spec for a long time, it can be off from 0.015 inches TIR (ideal) up to 0.1 inches. Balancing to grade G 6.3 is common, but balancing to G 1.6 is the gold standard for tighter tolerance so the spool performs better and lasts longer with less vibration and better-quality rolls.

Note: A bent reel spool can be easily spotted as the vibration/bouncing is clearly visible. A common misunderstanding is that a shaft has simply gone out of balance. In truth, a shaft showing signs of vibration and bounce has some degree of bend. In most cases, the spool can be straightened and rebalanced. If, however, the shaft has been bent more than two or three times, it will likely have to be scrapped.

reel spool refurbishment begins with a thorough inspection of all components and operation
A reel spool refurbishment begins with a thorough inspection of all components and operation. Runout is also checked, and all surface areas are inspected for damage that can affect proper operation and reliability.

Once the evaluation process is complete, Goldenrod issues a report detailing the suggested work to be done. Based on that report, a proposal is generated.

Whether the spools are recently commissioned on a new tissue machine or have been retrofitted to a machine that has more than 50 years of service, the product can be easily serviced onsite. Goldenrod also knows that providing mills comprehensive refurbishment options is critical to being a valued partner committed to 24/7/365 mill duty expectations.

John Pretto is president of Goldenrod Corporation. Goldenrod offers complete engineering services, including shaft measurement, balancing, straightening, and shaft and chuck refurbishment. To learn more, contact customer service at or (203) 723-4400.

Post Tags